Edimax IC-3110P Manuel d'utilisateur télécharger pdf (Page 31)

The descriptions of every setting in this menu will be given below:

Item Description

Video Type Specifies video encoding type. Available options

are ‘MPEG4’, ‘MJPEG’, and ‘H.264’. Different

encoding type requires different bandwidth, and

provides different video quality.

Frequency If the place where this Network Camera points to

has a (or more) fluorescent light(s), the image

may look flashing. In this case, you can adjust

this setting to the frequency of electrical power;

this can improve the image quality effectively. If

you don’t know which one you should use, just try

any of them and select one with less flicker.

Flip Mode If you’re not putting this camera on a horizontal

surface but hang the camera on the ceiling or

wall, you can use this function to rotate the

displaying image.

Brightness /

Saturation /

Sharpness

Select brightness, saturation, and sharpness

from dropdown menu, and click ‘ - ' or ‘ + ‘ button

to increase or decrease brightness / saturation /

sharpness setting value. In certain environment,

adjust brightness, saturation, and / or sharpness

will help improve video quality.

Volume Adjust the volume of audio output. Press ‘+’ or

‘-‘ button to increase or decrease volume.

NOTE: When you change any setting(s) listed above, please click ‘Apply’ button

so the change(s) will take effect. For following functions, changes will take effect

right away.

Snapshot

Click ‘Snapshot’ button to save the displaying image

as an image file, a message box will appear after

you click ‘Snapshot’ button, showing the filename

and location of saved image file (default filename is

current date and time).

Default directory used to save image file is ‘C:\’, you

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 147 148

Pas de commentaire

Edimax IC-3110P Manuel d'utilisateur Page 31