Edimax N300 Manuel d'utilisateur

EW-7438RPn User Manual 07-2012 / v1.2

8 Chapter II: Extender modeIn extender mode, the Wi-Fi extender receives a wireless signal from a root wireless access point or router. It then repe

9 Plug the Wi-Fi extender into a power outlet close to the root wireless access point and switch it on (1). The extender will automatically initial

10 2-1-1 Hardware WPS Button Setup 1. Press and hold the WPS button on the extender for 2 seconds, until the WPS LED starts flashing. 2. Pre

Whpoi hen the extint, the folPhase Phase Phase Phase Phase DONE NotdiffpoimayestawebBrotender detllowing se1 2 3 4 E te: This WPferent dev

WhStr (3) plapowwil You SteFlaFla hen a WPSength LEDPlease moce will bewer outlet ll be reestau can checeady light: ashing: ashing r

13 The quick installation setup is now done, you can refer to ‘2-2 Extender mode Advanced Settings’ to login to the web UI for other advanced settin

14 2-1-2 Web browser quick setup Before you can connect to the extender and start configuration procedures, your computer must be able to get an IP

2. Now you ways to a Notclic“OKNotPleshould beccess the wte: If you arck “ConnectK”. te: If you hease click “Ce con

MeOpin t MeEntaddethod 1 (Wen your wto the exte ethod 2 (Wter the extdress bar. http://exteNoton Windows Pweb browseender’s weWindows, tender’s

3. 4. You will tand the deiQ Setup wAll the deone to whWi-Fi netto search access pothen be prefault passwill start detected Wihich you wtwork you a

COPYRIGHT Copyright © Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, s

5. You will bpoint’s wiwireless aextender’one. For the wnetwork i Notin tNotwirextfail Youfor be promptireless secaccess poins access

6. 7. 8. 9. After youwireless kresult withbeen succcontinue: Click “APPlease waAfter the extender. SSID in yu click “NEkey with yhin 2 minucessf

Notwirclieautrefete: After thereless broadent and will omatically. er to ‘2-2 Ex e wireless cdband router receive its If you wanxtender Mo20

2-22-2The MeAft(IEformkey MeAft(IEadd Regto epas 2 Extender2-1 Connecere are twoethod 1 (Wter connecE, Firefox, mat http://y: ethod 2 (Wter connecE,

22 The configuration screen will appear shortly: 

23 2-2-2 HomeThe status and information of this Wi-Fi extender will be displayed here. To access the ‘Home’ menu, click ‘Home’ on the left. Y

Notwinwinusete: When yondow will apndows, so pe the ‘Show ou click theppear. Somlease disablClient’ feat24 e ‘Show Actme browsersle pop-up

25 2-2-3 WPS SettingYou can configure WPS (Wi-Fi Protected Setup) here. By using WPS, you can quickly establish a secure connection between this Wi-

26 Item Description Enable WPS You can enable or disable the WPS feature. Disabling WPS here will also disable the hardware WPS button. WPS is en

NotnotlateWPte: For WPSt support WPest WPS2.0 PA-PSK, to The ‘WPSwhile thisWPS requS2.0 complPS connectspecificatioavoid WPS27 S’ LED ons W

1 Contents Contents ... 1Chapter I: Produ

28 2-2-4 Advanced SettingsYou can configure advanced wireless settings on this page. Please note that these settings should not be configured by nov

29 Item Description Fragment Threshold Set the fragment threshold. Do not modify the default value if you don’t know what this does, default value

30 setting is ‘Short Preamble’. Broadcast ESSID When set to ‘enabled’, every wireless device will be able to scan for and find this Wi-Fi extender;

31 If you wish to continue configuring this Wi-Fi extender, click the ‘CONTINUE’ button; if you want to save changes and apply the changes, click th

32 2-2-5 MAC Address FilteringThis Wi-Fi extender can use its MAC address filter to only allow wireless users with certain MAC addresses to connect.

33 Item Description Enable Wireless Access Control Check this box to enable MAC filtering. If you don’t check this box, anyone who knows the wireles

34 click the ‘APPLY’ button. You’ll be prompted to wait for 30 seconds before you can reconnect to this Wi-Fi extender. TIP: If you don’t know the M

35 Select the connection that you’ll be using to connect to the Wi-Fi extender (in this example, ‘Local Area Connection’): Click the ‘Details…’

36 The MAC address of the selected network device will be displayed here as ‘Physical Address’. 

37 

2 Chapter I: Product Information 1-1 Introduction Thank you for purchasing this universal Wi-Fi extender! The ultra-compact design with built-i

38 2-2-6 System SettingsYou can change the settings of several system-level parameters on this page, including the administrator password, and IP ad

39 The following setup page will appear:  Password Settings The default password of this extender is 1234, and it’s displayed on the login prompt

40 Item Description Current Password To change the password, you have to input the current password first. New Password Input the new password here

41 Management IP Item Description IP Address Input the IP address of the LAN / Wi-Fi port of this Wi-Fi extender. NOTE: Please remember this IP

42 When you finish changing the settings on this page, click the ‘APPLY’ button. You’ll see the following message: If you wish to continue configur

43 2-2-7 Configuration You can back up and restore the configuration of this Wi-Fi extender, so you can recall all settings in a very short time, wi

44 select a saved configuration file on your computer. Then click the ‘Upload’ button to change the current settings to saved ones. Reset to Factory

ItemBroWhupg Res WhmayTo con Cliabom owse hen you argrade. set hen you thy help. reset this nfirm the rck the ‘OKort. NoWHre ready, chink

2-3 If yreseholthenWhWi-rein 3 Resettingyou find thet the devild it down n release then the Po-Fi LED (nitialized aNotrele10 behg the Exte

47 Chapter III: Appendix3-1 Configuring TCP/IP on PC3-1-1 Windows XP IP Address Setup: 1. Click the ‘Start’ button (it should be located at lower-

3 1-2 Safety Information In order to ensure the safety of users and this device, please follow the following safety instructions: 1. This Wi-Fi ext

48 3-1-2 Windows Vista/Windows 7 IP address setup: 1. Click the ‘Start’ button (it should be located at the lower-left corner of your computer),

49 2. Select ‘Obtain an IP address automatically’ and ‘Obtain DNS server address automatically’, then click ‘OK’.

50

51 3-2 SpecificationsSoC + RF: Realtek RTL8196CS+ RTL8192CE Flash: 2MB SDRAM: 16MB LAN Port: 10/100M UTP Port x 1 Power: 5VDC, 1A Switching Powe

52 3-3 Glossary 1. What is the IEEE 802.11g standard? 802.11g is the new IEEE standard for high-speed wireless LAN communications, and provides for

53 a branch or SOHO operation. 5. What is Infrastructure? An integrated wireless and wireless and wired LAN is called an Infrastructure configurat

54 12. What is DSSS? What is FHSS? And what are their differences? Frequency-hopping spread-spectrum (FHSS) uses a narrowband carrier that changes

55 3-4 Technical Support InformationSupport documentation is available on the enclosed CD and on our global websites. USA Website: http://www.edim

56

4 1-3 Package Contents Before you start to use this Wi-Fi extender, please check if there’s anything missing from the package, and contact your deal

5 1-4 Familiarizing Yourself with Your New Wi-Fi Extender Interface Descriptions Item Item Name Description A LAN Port 10/100M

6 LED Definitions LED Name LED Status Description Signal Strength On Excellent signal reception (Signal strength 50 – 100%) Flashing Good signal

7 WPS On WPS connection established Flashing WPS in progress (waiting for another WPS device’s connection) Flashing Rapidly WPS error Off No WPS con