Edimax MFP Server Series Manuel d'utilisateur télécharger pdf (Page 4)

1. Product Package

This package contains the following components:

 One MFP Server

 One Antenna (Only Wireless version)

 One Power Adapter

 One Quick Installation Guide

 One CD-ROM (Including Multi-Language QIG and all the

software / utilities, drivers and user’s manual)

2. Getting Started

Tip: You have to uninstall all the MFP server drivers and utilities

if you have installed the previous version.

3.1 Hardware Installation Procedure

1. Unpack the MFP Server package and verify that all the items

listed in the previous section are provided.

2. Plug the USB cable to the MFP Server and the MFP you want

to share on the network.

3. Connect the MFP Server to your network by attached the

network cable to the network port of the MFP server.

4. Connect the power adapter to the MFP Server. The MFP

Server will perform the Power-On-Self-Test (POST) after it is

powered on. When the Status LED is unlighted, the MFP

Server is ready.

Note: You must use the power adapter shipped along with the

MFP Server, do NOT use any other power adapter from other

sources.

3.2 Software Installation Procedure

The MFP Server installation can be performed on Windows

95/98SE/Me/NT/2000/XP with the same user interface. Please

follow the steps below to start installation.

1 2 3 4 5 6 7 8 9 ... 196 197

Pas de commentaire

Edimax MFP Server Series Manuel d'utilisateur Page 4