Edimax i-Watcher i-Watcher Pan/Tilt Internet IP Camera Spécifications télécharger pdf (Page 20)

3-4 Advanced Network

In some special situation, your network environment only provides PPPoE connection

(ADSL service), there is no NAT/router available. You will then need to set the PPPoE

settings in the “Advanced Network”20page. Only the PPPoE username and password are

needed to let PPPoE work. After the ”Save&Apply” button is pressed, the PPPoE function

will work immediately. You can check the ”Registration status” in the “Information” page to

see if the IP CAM is registered using the PPPoE connection.

Please be noticed that the DHCP or static IP settings in the “Network”20page can work

together with the PPPoE connection. Only that the PPPoE has higher priority, so, if the

PPPoE is working, the IP CAM will use PPPoE to connect to the Internet.

The default setting is ”Disable PPPoE”.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 117 118

Pas de commentaire

Edimax i-Watcher i-Watcher Pan/Tilt Internet IP Camera Spécifications Page 20