Edimax EDIMAX FAST ETHERNET MFP SERVER VERSION: 2.0 Manuel d'utilisateur télécharger pdf (Page 19)

12. Please set the network settings for the MFP Server manually. By default,

the network settings are as follows.

IP Address: 192.168.2.2

Subnet Mask: 255.255.255.0

If you select “DHCP”, the MFP Server will try to determine your network

settings automatically. If a DHCP Server is present within the network, the

MFP Server will automatically obtain and configure the network settings

from the DHCP Server. The assigned IP Address will be shown in the IP

Address fields. If no DHCP Server is present within the network, please

assign the network settings of the MFP Server manually. Please click

“Next” once you have found appropriate network settings for the MFP

Server.

Note: The MFP Server IP Address should be in the same network

segment with the connected computer. If the network settings are incorrect,

a message will be prompted to remind you after you click “Next”. Please

make sure that you have set the right settings before going to the next step.

If you don’t want to set it now, please click “Cancel” to finish the installation.

You can then use the “Server Manager” utility to configure the MFP

Server.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 117 118

Pas de commentaire

Edimax EDIMAX FAST ETHERNET MFP SERVER VERSION: 2.0 Manuel d'utilisateur Page 19