Edimax CV-7428nS Manuel d'utilisateur télécharger pdf (Page 30)

back to the factory default.

Note: You can also reset the device to the factory

default by pressing and holding the Reset/WPS

button for at least 10 seconds. When the green PWR

LED begins to flash, release the WPS/Reset button

and wait for the device to restart. The device is

ready when the PWR LED has stopped flashing, and

displays on. The Reset/WPS button is located at the

rear of the device. See II-4. Resetting The Wireless

Bridge.

III-6-1. Firmware Upgrade

Selecting “Firmware upgrade” from the

“Configuration Tool” menu allows you to update

the system firmware to a more recent version. You

can download the latest firmware from the Edimax

website.

Note: Do not turn off or disconnect the access point

during a firmware upgrade, as this could damage

the device.

Note: It is recommended that you use a wired

Ethernet connection to upload the firmware file.

Click on the browse button to open a window and locate the downloaded

firmware file in your computer.

Confirm your selection and click “APPLY” to make changes take effect. The

following message will appear:

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 66 67

Pas de commentaire

Edimax CV-7428nS Manuel d'utilisateur Page 30