Edimax EW-7228APn Manuel d'utilisateur télécharger pdf (Page 30)

2-4-1 AP Mode

This is the most common mode. When in AP mode, this access point acts

as a bridge between 802.11b/g/Draft-N wireless devices and wired

Ethernet network, and exchange data between them.

When you select „AP‟, the following options will be displayed:

Here are descriptions of every setup item:

Band

Please select the wireless band you wish to use. By

selecting different band setting, you‟ll be able to

allow or deny the wireless client of a certain band.

If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz

(G), only wireless clients using the wireless band

you select (802.11b, 802.11 Draft-N, or 802.11g)

will be able to connect to this access point.

If you select 2.4GHz (B+G), then only wireless

clients using 802.11b and 802.11g band will be

able to connect to this access point.

If you want to allow 802.11b, 802.11g, and 802.11

Draft-N clients to connect to this access point,

select 2.4GHz (B+G+N).

Main ESSID

Please input the ESSID (the name used to identify

this wireless access point) here. You can input up

to 32 alphanumerical characters. PLEASE NOTE

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 81 82

Pas de commentaire

Edimax EW-7228APn Manuel d'utilisateur Page 30