Edimax ES-5224R+ Manuel d'utilisateur télécharger pdf (Page 172)

User Manual

Publication date: July, 2006

Revision A2

166

logout

Syntax:

logout

Description:

When you enter this command via Telnet connection, you would logout the system

and disconnect. If you connect the system through direct serial port with RS-232

cable, you would logout the system and be back to the initial login prompt when you

run this command.

Argument:

None.

Possible value:

None.

Example:

# logout

restore default

Syntax:

restore default

Description:

When you use this function in CLI, the system will show you the information “Do you

want to restore the default IP address?(y/n)”. If you choose Y or y, the IP address

will restore to default “192.168.1.1”. If you choose N or n, the IP address will keep

the same one that you had saved before.

If restoring default successfully, the CLI would prompt if reboot immediately or not. If

you press Y or y, the system would reboot immediately; otherwise, it would be back

to the CLI system. After restoring default configuration, all the changes in the startup

configuration would be lost. After rebooting, the entire startup configuration would

reset to factory default.

Argument:

None.

Possible value:

None.

Example:

# restore default

Do you want to restore the default ip address?(y/n)

Restoring ...

Restore default configuration successfully.

Do you want to reboot the system?(y/n)

1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 264 265

Pas de commentaire

Edimax ES-5224R+ Manuel d'utilisateur Page 172