Edimax ES-5224R+ Manuel d'utilisateur télécharger pdf (Page 63)

User Manual

Publication date: July, 2006

Revision A2

3-2-4. Detail Counter

The function of Detail Counter collects any information and provides the

counting about the traffic of the port, no matter the packet is good or bad.

In the Fig. 3-14, the window can show only one port counter information at

the same time. To see another port’s counter, you have to pull down the list of

Select, then you will see the figures displayed about the port you had chosen.

Each data field has 20-digit long. If the counting is overflow, the counter will

be reset and restart counting. The data is updated every time interval defined by the

user. The valid range is 3 to 10 seconds. The Refresh Interval is used to set the

update frequency. Default update time is 3 seconds.

Fig. 3-14

Function name:

Detail Counter

Function description:

Display the detailed counting number of each port’s traffic. In the Fig. 3-14, the

window can show all counter information of each port at one time.

Parameter description:

Rx Packets:

The counting number of the packet received.

Rx Octets:

Total received bytes.

Rx Errors:

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 264 265

Pas de commentaire

Edimax ES-5224R+ Manuel d'utilisateur Page 63