Edimax Print Server Manuel d'utilisateur télécharger pdf (Page 55)

5.2.2.2 Configuring as Remote Printer Mode

This remote printer feature is not available for the

10/100Mbps 3-port PrintSir models. Make sure that you

have created the NetWare print server with Type

Remote using PCONSOLE utility before you configure

the PrintSir. For more detailed information about

PCONSOLE, please refer to NetWare’s manual. You

can set up the NetWare print server and print queue

objects by following the steps below:

1. Run the NetWare PCONSOLE program.

2. Change the current file server, if necessary,

using the Change Current File Server menu

selection.

3. Choose the Print Queue Information menu

selection.

4. Press the Insert key to add a new print queue.

5. Type in a print queue name, such as “PQ” or

“Q1”.

6. You have now successfully created the print

queue that your NetWare print server will serve.

Press the Escape key until the Available Options

main menu is displayed.

7. Select Print Server Information.

8. Press the Insert key to add a new NetWare print

server.

9. Press Enter to select the newly created print

server.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 110 111

Pas de commentaire

Edimax Print Server Manuel d'utilisateur Page 55