Edimax Print Server Manuel d'utilisateur télécharger pdf (Page 87)

The PrintSir stores its internal programs in “flash”

memory, which you can upgrade when new versions of the

PrintSir’s software become available or when you want to

switch between “Standard Feature Set - Type 1” or

“NetWare Enhancement Feature Set – Type 2” -- The

difference between these two feature sets is described at

Chapter 1.6.(Contact your dealer for information about

software upgrades.) To perform an upgrade,

z Make sure the updated PSxxROM.BIN (depending

on your model) file is stored in your computer or

CD-ROM.

z Choose the updated firmware in File Name field.

For example,

<CD Driver>\FLASHROM\<Model Name>\PSxxROM.BIN

z Choose the suitable Feature Set (“Standard Feature

Set - Type 1” or “NetWare Enhancement Feature

Set – Type 2” ) and then click Upgrade button to

upgrade the PrintSir’s flash memory. The yellow

Status LED on the PrintSir should be lit

continuously.

7.12 DHCP Cfg - DHCP Server Configure

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 110 111

Pas de commentaire

Edimax Print Server Manuel d'utilisateur Page 87