Edimax ES-5224R+ Manuel d'utilisateur télécharger pdf (Page 41)

User Manual

Publication date: July, 2006

Revision A2

3-1-2. IP Configuration

IP configuration is one of the most important configurations in the switch.

Without the proper setting, network manager will not be able to manage or view the

device. The switch supports both manual IP address setting and automatic IP

address setting via DHCP server. When IP address is changed, you must reboot the

switch to have the setting taken effect and use the new IP to browse for web

management and CLI management.

Fig. 3-4 IP Address Configuration

Function name:

IP Configuration

Function description:

Set IP address, subnet mask, default gateway and DNS for the switch.

Parameter description:

DHCP Setting:

DHCP is the abbreviation of Dynamic Host Configuration Protocol. Here

DHCP means a switch to turn ON or OFF the function.

The switch supports DHCP client used to get an IP address automatically

if you set this function “Enable”. When enabled, the switch will issue the

request to the DHCP server resided in the network to get an IP address.

If DHCP server is down or does not exist, the switch will issue the

request and show IP address is under requesting, until the DHCP server

is up. Before getting an IP address from DHCP server, the device will not

continue booting procedures. If set this field “Disable”, you’ll have to

input IP address manually. For more details about IP address and DHCP,

please see the Section 2-1-5 “IP Address Assignment” in this manual.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 264 265

Pas de commentaire

Edimax ES-5224R+ Manuel d'utilisateur Page 41