Edimax WAP1750 Manuel d'utilisateur télécharger pdf (Page 161)

Edimax Pro NMS

155

802.11n Protection

Enable/disable 802.11n protection, which

increases reliability but reduces bandwidth

(clients will send Request to Send (RTS) to

access point, and access point will broadcast

Clear to Send (CTS), before a packet is sent

from client.)

DTIM Period

Set the DTIM (delivery traffic indication

message) period value of the wireless radio.

The default value is 1.

RTS Threshold

Set the RTS threshold of the wireless radio. The

default value is 2347.

Fragment

Threshold

Set the fragment threshold of the wireless

radio. The default value is 2346.

Multicast Rate

Set the transfer rate for multicast packets or

use the “Auto” setting.

Tx Power

Set the power output of the wireless radio. You

may not require 100% output power. Setting a

lower power output can enhance security since

potentially malicious/unknown users in distant

areas will not be able to access your signal.

Beacon Interval

Set the beacon interval of the wireless radio.

The default value is 100.

Station idle

timeout

Set the interval for keepalive messages from

the access point to a wireless client to verify if

the station is still alive/active.

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 231 232

Pas de commentaire

Edimax WAP1750 Manuel d'utilisateur Page 161