Edimax WAP1750 Manuel d'utilisateur télécharger pdf (Page 65)

AP Mode

RADIUS Type

Select “Internal” to use the access point’s

built-in RADIUS server or “external” to use an

external RADIUS server.

RADIUS Server

Enter the RADIUS server host IP address.

Authentication

Port

Set the UDP port used in the authentication

protocol of the RADIUS server. Value must be

between 1 – 65535.

Shared Secret

Enter a shared secret/password between 1 –

99 characters in length. This should match the

“MAC-RADIUS” password used in IV-3-1-3-6 or

IV-3-2-3.

Session Timeout

Set a duration of session timeout in seconds

between 0 – 86400.

Accounting

Enable or disable RADIUS accounting.

Accounting Port

When accounting is enabled (above), set the

UDP port used in the accounting protocol of

the RADIUS server. Value must be between 1 –

65535.

IV-3-3-2. Internal Server

The access point features a built-in RADIUS

server which can be configured as shown

below used when “Internal” is selected for “RADIUS Type” in the “Wireless

Settings”  “RADIUS”  “RADIUS Settings” menu.

To use RADIUS servers, go to “Wireless Settings”



“Security” and

select “MAC RADIUS Authentication”



“Additional

Authentication” and select “MAC RADIUS Authentication” (see

IV-3-1-3. & IV-3-2-3).

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 231 232

Pas de commentaire

Edimax WAP1750 Manuel d'utilisateur Page 65