Edimax WAP1750 Manuel d'utilisateur télécharger pdf (Page 34)

AP Mode

IV-2. Network Settings

Screenshots displayed are examples. The information shown on

your screen will vary depending on your configuration.

IV-2-1. LAN-Side IP Address

The “LAN-side IP address” page allows you to

configure your access point on your Local Area

Network (LAN). You can enable the access point to dynamically receive an IP

address from your router’s DHCP server or you can specify a static IP address

for your access point, as well as configure DNS servers.

The access point’s default IP address is 192.168.2.2.

LAN-side IP Address

IP Address

Assignment

Select “DHCP Client” for your access point to

be assigned a dynamic IP address from your

router’s DHCP server, or select “Static IP” to

manually specify a static/fixed IP address for

your access point (below).

IP Address

Specify the IP address here. This IP address

will be assigned to your access point and will

replace the default IP address.

Subnet Mask

Specify a subnet mask. The default value is

255.255.255.0

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 231 232

Pas de commentaire

Edimax WAP1750 Manuel d'utilisateur Page 34