Edimax ES-5224R+ Manuel d'utilisateur télécharger pdf (Page 24)

User Manual

Publication date: July, 2006

Revision A2

2-1-4-1. Configuring the Management Agent of 24 Fast Ethernet + 2 Gigabit L2

Managed Switch through the Serial RS-232 Port

To perform the configuration through RS-232 console port, the switch’s serial

port must be directly connected to a DCE device, for example, a PC, through

RS-232 cable with DB-9 connector. Next, run a terminal emulator with the default

setting of the switch’s serial port. With this, you can communicate with the switch.

In the switch, RS-232 interface only supports baud rate 57.6k bps with 8 data

bits, 1 stop bit, no parity check and no flow control.

To configure the switch, please follow the procedures below:

1. Find the RS-232 DB-9 cable with female DB-9 connector bundled.

Normally, it just uses pins 2, 3 and 7. See also Appendix B for more

details on Null Modem Cable Specifications.

2. Attaches the DB-9 female cable connector to the male serial RS-232

DB-9 connector on the switch.

3. Attaches the other end of the serial RS-232 DB-9 cable to PC’s serial

port, running a terminal emulator supporting VT100/ANSI terminal with

The switch’s serial port default settings. For example,

Windows98/2000/XP HyperTerminal utility.

Note: The switch’s serial port default settings are listed as follows:

Baud rate 57600

Stop bits 1

Data bits 8

Parity N

Flow control none

4. When you complete the connection, then press <Enter> key. The login

prompt will be shown on the screen. The default username and

password are shown as below:

Username = admin Password = admin

24 Fast Ethernet + 2 Gigabit L2 Managed Switch

Default IP Setting:

IP address = 192.168.1.1

Subnet Mask = 255.255.255.0

Default Gateway = 192.168.1.254

Terminal or Terminal Emulato

Fig. 2-7

RS-232 cable with female

DB-9 connector at both ends

RS-232

AC Line 100-240V 50/60 Hz RS-232 DB-9 Connector

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 264 265

Pas de commentaire

Edimax ES-5224R+ Manuel d'utilisateur Page 24