Edimax ES-5224R+ Manuel d'utilisateur télécharger pdf (Page 25)

User Manual

Publication date: July, 2006

Revision A2

• Set IP Address, Subnet Mask and Default Gateway IP Address

Please refer to Fig. 2-7 CLI Management for details about the ex-factory

setting. They are default setting of IP address. You can first either configure your PC

IP address or change IP address of the switch, next to change the IP address of

default gateway and subnet mask.

For example, your network address is 10.1.1.0, and subnet mask is

255.255.255.0. You can change the switch’s default IP address 192.168.1.1 to

10.1.1.1 and set the subnet mask to be 255.255.255.0. Then, choose your default

gateway, may be it is 10.1.1.254.

Default Value 24 Fast Ethernet + 2 Gigabit L2

Managed Switch

Your Network Setting

IP Address

192.168.1.1 10.1.1.1

Subnet

255.255.255.0 255.255.255.0

Default Gateway

192.168.1.254 10.1.1.254

Table 2-3

After completing these settings in the switch, it will reboot to have the

configuration taken effect. After this step, you can operate the management through

the network, no matter it is from a web browser or Network Management System

(NMS).

Fig. 2-8 the Login Screen for CLI

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 264 265

Pas de commentaire

Edimax ES-5224R+ Manuel d'utilisateur Page 25